点击图片查看原图
Peppers铠装防爆格兰系列（C）
代理商：上海颐品自动化科技有限公司
Peppers防爆格兰，Peppers防爆变径，Peppers防爆堵头，Peppers防爆呼吸阀
Peppers PRODUCT TYPE C
Single Compression Gland for Armoured Cable featuring
Dedicated Armour Clamping
Ex eb : Ex ta : IP66 Class I Div 2 : AEx e : AEx ta
PRODUCT DEscriptION
“C” type single compression glands are certified Increased Safety Ex eb and Dust Protected Ex ta.
They are suitable for use in Zone 1 and 2 for Gas Groups IIA, IIB and IIC and additionally for use in
Zones 20, 21 and 22 for Dust Groups IIIA, IIIB and IIIC. The gland is suitable for cables that exhibit
“cold flow” characteristics, whilst providing an IP66 environmental seal on the cable outer sheath
and a detachable armour specific clamping system for wire (W), braid/tape (X) armoured cables.
The “IE” version allows the gland to be used with HV cables where the fault load is greater than
10.4kA and options are available for use with LSOH cables and extreme temperature applications.
COMPLIANCE STANDARDS:
EN 60079-0, EN 60079-7, EN 60079-31
IEC 60079-0, IEC 60079-7, IEC 60079-31 & IEC 60529
C22.2 (see certificate), CAN/CSA 60079-0/7
UL514B, UL1203, UL2225, UL50E, ANSI/UL 60079-0/7, ISA 60079-31
Example Part Numbering(See below for details)
C1WBE/NP/20/050NPT
Materials: Brass, Stainless Steel or Aluminium
16 M16 x 1.5 1/2” or 3/4” 16 N/A 8.4 8.4 13.5 4.9 10.0 0.90 0.15-0.35 58 24.0 26.5 0.143 L24
16 M20 x 1.5 1/2” or 3/4” 16 N/A 8.4 8.4 13.5 4.9 10.0 0.90 0.15-0.35 58 24.0 26.5 0.154 L24
20S M20 x 1.5 1/2” or 3/4” 16 N/A 11.7 11.5 16.0 9.4 12.5 0.90-1.25 0.15-0.35 58 24.0 26.5 0.125 L24
20 M20 x 1.5 1/2” or 3/4” 16 N/A 14.0 15.5 21.1 12.0 17.6 0.90-1.25 0.15-0.50 58 30.0 33.0 0.180 L30
25 M25 x 1.5 3/4” or 1” 16 N/A 20.0 20.3 27.4 16.8 23.9 1.25-1.60 0.15-0.50 58 37.6 41.4 0.256 L38
32 M32 x 1.5 1” or 1 ¼” 16 N/A 26.3 26.7 34.0 23.2 30.5 1.60-2.00 0.15-0.55 65 46.0 50.6 0.400 L46
40 M40 x 1.5 1 ¼” or 1 ½” 16 N/A 32.2 33.0 40.6 28.6 36.5 1.60-2.00 0.20-0.60 72 55.0 60.5 0.649 L55
50S M50 x 1.5 1 ½” or 2” 16 N/A 38.2 39.4 46.7 34.8 42.4 2.00-2.50 0.20-0.60 73 65.0 71.5 0.940 L65
50H M50 x 1.5 1 ½” or 2” 16 N/A 38.2 45.7 53.2 41.1 48.5 2.00-2.50 0.30-0.80 73 65.0 71.5 0.849 L65
50 M50 x 1.5 2” 16 N/A 44.1 45.7 53.2 41.1 48.5 2.00-2.50 0.30-0.80 73 65.0 71.5 0.707 L65
63S M63 x 1.5 2” or 2 ½” 19 N/A 50.1 52.1 59.5 47.5 54.8 2.50 0.30-0.80 76 80.0 88.0 1.369 L80
63H M63 x 1.5 2” or 2 ½” 19 N/A 50.1 58.4 65.8 53.8 61.2 2.50 0.30-0.80 76 80.0 88.0 1.306 L80
63 M63 x 1.5 2 ½” 19 N/A 56.0 58.4 65.8 53.8 61.2 2.50 0.30-0.80 76 80.0 88.0 1.123 L80
75S M75 x 1.5 2 ½” or 3” 19 N/A 62.0 64.8 72.2 60.2 68.0 2.50 0.30-1.00 82 90.0 99.0 1.661 L90
75H M75 x 1.5 2 ½” or 3” 19 N/A 62.0 71.1 78.0 66.5 73.4 2.50 0.30-1.00 82 90.0 99.0 1.553 L90
75 M75 x 1.5 3” 19 N/A 68.0 71.1 78.0 66.5 73.4 2.50 0.30-1.00 82 90.0 99.0 1.310 L90
80 M80 x 2.0 3” or 3 ½” 25 N/A 72.0 77.0 84.0 71.9 79.4 3.15 0.45-1.00 110 104.0 115.2 2.718 L104
80H M80 x 2.0 3” or 3 ½” 25 N/A 72.0 79.6 90.0 75.0 85.4 3.15 0.45-1.00 110 104.0 115.2 2.489 L104
85 M85 x 2.0 3” or 3 ½” 25 N/A 78.0 79.6 90.0 75.0 85.4 3.15 0.45-1.00 110 104.0 115.2 2.326 L104
90 M90 x 2.0 3 ½” or 4” 25 N/A 84.0 88.0 96.0 82.0 91.4 3.15 0.45-1.00 110 114.0 125.7 2.852 L114
90H M90 x 2.0 3 ½” or 4” 25 N/A 84.0 92.0 102.0 87.4 97.4 3.15 0.45-1.00 110 114.0 125.7 2.629 L114
100 M100 x 2.0 3 ½” or 4” 25 N/A 90.0 92.0 102.0 87.4 97.4 3.15 0.45-1.00 110 114.0 125.7 2.496 L114
• Gland size does not necessarily equate to the entry thread size.
• The IP O-ring seal is only available on metric entry threads. IP washers can be
supplied for tapered entry threads.
• Dimensions (A) & (B) may differ for glands with non metric entry threads.
Please refer to our “Thread Reference Tables” for specific dimensions.
• Assembly instructions must be read prior to installation and adhered to in full.
• Peppers supply products with parallel entry threads that conform to the
flameproof threaded joint requirements of IEC/EN 60079-1 and other equivalent
standards. They usually incorporate a thread run out according to the available
machining techniques and will not have a full form thread for the entire length.
Peppers Cable Glands Limited will not be held responsible for clients’ installations
where this has not been taken into account.
• When selecting IP Washer material for use with glands, please be aware of
the accessories temperature range to ensure they are suitable for the
intended installation.
• Where approval in addition to ATEX, IECEx and CSA is required, this must be
clearly requested at time of enquiry / order.
Peppers防爆格兰，Peppers防爆变径，Peppers防爆堵头，Peppers防爆呼吸阀
Hawke防爆格兰，Hawke防爆变径，Hawke防爆堵头，Hawke防爆呼吸阀等
Feam防爆格兰，Bartec防爆变径，Feam防爆堵头，Bartec防爆呼吸阀等
Cooper防爆格兰，Cooper爆变径，Cooper防爆堵头，Cooper防爆呼吸阀等
Peppers防爆格兰及附件代理商：上海颐品自动化科技有限公司（EPIN）