点击图片查看原图
Peppers铠装防爆格兰系列（EC*C）
代理商：上海颐品自动化科技有限公司
Peppers防爆格兰，Peppers防爆变径，Peppers防爆堵头，Peppers防爆呼吸阀
Peppers PRODUCT TYPE EC*C
Double Compression Barrier Gland designed for use with Armoured Cable
featuring Peppers multi-armour clamping system and Peppers T2000 or T1000 Compound
Ex db : Ex eb : Ex nR : Ex ta : IP66 : IP68 : IP69
PRODUCT DEscriptION
"EC*-C" type glands are certified Flameproof Ex db, Increased Safety Ex eb, Restricted Breathing
Ex nR and Dust Protected Ex ta. They are suitable for use in Group I Mining, Zone 1 and 2 for Gas
Groups IIA, IIB and IIC and additionally for use in Zones 20, 21 and 22 for Dusts Groups IIIA, IIIB
and IIIC. Occasionally referred to as "potting glands", they provide a compound barrier Ex db & IP
seal on the cable inner cores, eliminating damage to cables that exhibit "cold flow" characteristics
and an environmental seal on the outer sheath. The unique features include, Peppers multi-
armour clamping system for wire, braid and tape armoured cables and Peppers T1000 or T2000
compound that enables a quick and easy installation. An innovative barrier chamber that allows
for a full inspection of the compound fill. The gland maintains IP66, IP68 to 100 metres and IP 69.
Is deluge proof without the use of an additional seal or deluge boot. It is supplied with an IP O-ring
seal as standard on metric entry threads and options are available for use with lead sheath cables.
COMPLIANCE STANDARDS:
EN 60079-0, EN 60079-1, EN 60079-7, EN 60079-15, EN 60079-31
IEC 60079-0, IEC 60079-1, IEC 60079-7, IEC 60079-15, IEC 60079-31 & IEC 60529
Example Part Numbering(See below for details)
EC2-SBF20/NP/M20/050NPT
Materials: Brass, Stainless Steel
Peppers New T2000 Compound
Hand operated No Mixing VMS Cartridge
Fast setting compound. Conductor termination can be effected from 60 minutes @ 23°C
Featuring Peppers unique “no ferrule" technology allowing it to be fully retractable and inspectable
Robust Compound for extreme conditions
Deluge proof without the requirements of additional seals or boots
Built in interface seal with metric threads
16S M16 x 1.5 3/8” 16 12 12 8.9 4.0 10.0 8.4 13.5 6.7 10.3 0.80-1.25 0.10-0.80 65.88 25.4 28.0 0.143 EL24
16 M20 x 1.5 1/2” 16 15 15 10.4 4.0 11.7 8.4 13.5 6.7 10.3 0.80-1.25 0.10-0.80 65.88 25.4 28.0 0.147 EL24
20S M20 x 1.5 1/2” or 3/4” 16 35 15 10.4 4.0 11.7 11.5 16.0 9.4 12.5 0.80-1.25 0.10-0.80 65.88 25.4 28.0 0.147 EL24
20 M20 x 1.5 1/2” or 3/4” 16 40 20 12.5 4.0 14.0 15.5 21.1 12.0 17.6 0.80-1.25 0.10-0.80 68.03 30.0 33.0 0.219 EL30
25 M25 x 1.5 3/4” or 1” 16 60 30 16.5 8.0 18.5 20.3 27.4 16.8 23.9 1.25-1.60 0.15-1.20 73.43 37.6 41.4 0.322 EL38
32 M32 x 1.5 1” or 1 ¼” 16 80 50 23.5 14.0 26.3 26.7 34.0 23.2 30.5 1.60-2.00 0.15-1.20 86.18 46.0 50.6 0.578 EL46
40 M40 x 1.5 1 ¼” or 1 ½” 16 130 65 28.8 16.0 32.2 33.0 40.6 28.6 36.2 1.60-2.00 0.15-1.20 89.82 55.0 60.5 0.832 EL55
50S M50 x 1.5 1 ½” or 2” 16 200 100 34.2 20.0 38.2 39.4 46.7 34.8 42.4 2.00-2.50 0.20-1.60 96.92 65.0 71.5 1.103 EL65
50 M50 x 1.5 2” 16 400 100 39.4 20.0 44.1 45.7 53.2 41.1 48.5 2.00-2.50 0.20-1.60 97.60 65.0 71.5 1.000 EL65
63S M63 x 1.5 2” or 2 ½” 19 400 130 44.8 30.0 50.1 52.1 59.5 47.5 54.8 2.00-2.50 0.30-1.60 96.65 80.0 88.0 1.613 EL80
63 M63 x 1.5 2 ½” 19 425 130 50.0 30.0 56.0 58.4 65.8 53.8 61.2 2.00-2.50 0.30-1.60 96.70 80.0 88.0 1.475 EL80
75S* M75 x 1.5 2 ½” or 3” 19 425 - 55.4 - 62.0 64.8 72.2 60.2 68.0 2.00-2.50 0.30-1.60 101.15 90.0 99.0 1.764 EL90
75* M75 x 1.5 3” 19 425 - 60.8 - 68.0 71.1 78.0 66.5 73.4 2.00-2.50 0.30-1.60 101.45 90.0 99.0 1.682 EL90
80* M80 x 2.0 3” or 3 ½” 25 425 - 64.4 - 72.0 77.0 84.0 71.9 79.4 3.15-4.00 0.30-1.60 127.18 104.7 115.2 3.452 EL104
85* M85 x 2.0 3” or 3 ½” 25 425 - 69.8 - 78.0 79.6 90.0 75.0 85.4 3.15-4.00 0.30-1.60 127.18 104.7 115.2 2.936 EL104
90* M90 x 2.0 3 ½” or 4” 25 425 - 75.1 - 84.0 88.0 96.0 82.0 91.4 3.15-4.00 0.30-1.60 126.15 114.3 125.7 3.722 EL114
100* M100 x 2.0 3 ½” or 4” 25 425 - 80.5 - 90.0 92.0 102.0 87.4 97.4 3.15-4.00 0.30-1.60 128.20 114.3 125.7 3.097 EL114
• Gland size does not necessarily equate to the entry thread size.
• The IP O-ring seal is only available on metric entry threads. IP washers can be
supplied for tapered entry threads.
• Dimensions (A) & (B) may differ for glands with non metric entry threads.
Please refer to our “Thread Reference Tables” for specific dimensions.
• Assembly instructions must be read prior to installation and adhered to in full.
• Peppers supply products with parallel entry threads that conform to the
flameproof threaded joint requirements of IEC/EN 60079-1 and other equivalent
standards. They usually incorporate a thread run out according to the available
machining techniques and will not have a full form thread for the entire length.
Peppers Cable Glands Limited will not be held responsible for clients’ installations
where this has not been taken into account.
• When selecting IP Washer material for use with glands, please be aware of
the accessories temperature range to ensure they are suitable for the
intended installation.
• Where approval in addition to ATEX, IECEx and CSA is required, this must be
clearly requested at time of enquiry / order.
Peppers防爆格兰，Peppers防爆变径，Peppers防爆堵头，Peppers防爆呼吸阀
Hawke防爆格兰，Hawke防爆变径，Hawke防爆堵头，Hawke防爆呼吸阀等
Feam防爆格兰，Bartec防爆变径，Feam防爆堵头，Bartec防爆呼吸阀等
Cooper防爆格兰，Cooper爆变径，Cooper防爆堵头，Cooper防爆呼吸阀等
Peppers防爆格兰及附件代理商：上海颐品自动化科技有限公司（EPIN）